DP GL Plus Firebird Freestyler

This is the Start of my DP GL Plus Firebird Freestyler build.

Just need a few bits to finish it.


This shows the Dual routing holes ant the rear of the GL Plus. Normally there is only the routing hole at the bottom



The DP is Laser Cut to Distinguish it as a GL Plus. DC 880 Caliper Fitted



DP Ladder Bars that are going to SBD to be made White and Pro Neck Stem with Potts Mod Front DC880 Fitted



Need to get the Cranks and Pedals from work Sugino CT's and Shimano DX Pedals. then the Izumi chain will be fitted



Hoping to be on this for the Blackpool roll around in May

looking good
brett what is the 3rd hole at the bottom for?

griff wrote:looking good
brett what is the 3rd hole at the bottom for?

The way my cable is routes is the Prototype models routing. Glyn Lewis got his foot caught in the cable doing a frame stand, before they were released so the production model only had the hole on the bottom. I have no idea why this frame has both of the holes at the back but the rear brake works much better routed this way. Ed. will only have the bottom hole in his GL Plus.

cool - thanks for clearing that up

as for ed's frame - that's probably the only hole he needs

griff wrote:cool - thanks for clearing that up

as for ed's frame - that's probably the only hole he needs

He doesn't need any of the holes as he hasn't routed his cable through the frame

very nice, someone was rolling around on one at blckpool and they just look so cool

Brettypeeps wrote:

griff wrote:cool - thanks for clearing that up

as for ed's frame - that's probably the only hole he needs

He doesn't need any of the holes as he hasn't routed his cable through the frame

WRONG numb nuts - fully routed THROUGHT THE LOWER HOLE with an inverted MX1000 on the rear and silver powerglides...



and its a LIMITED GL Plus... one of 500 ... read and weep

keep the green Brett... gonna look cloney with white bars... green seat post and green cranks would really set it apart... IN MY FOOKIN OPINON

ED209 wrote:
keep the green Brett... gonna look cloney with white bars... green seat post and green cranks would really set it apart... IN MY FOOKIN OPINON

x2 the green looks cool

Bru

Brett if this is gonna be a rider get a Renthal layback and paint it green - much stronger than the Oddy chrome ones - they jus BEND!

ED209 wrote:

Brettypeeps wrote:

griff wrote:cool - thanks for clearing that up

as for ed's frame - that's probably the only hole he needs

He doesn't need any of the holes as he hasn't routed his cable through the frame

WRONG numb nuts - fully routed THROUGHT THE LOWER HOLE with an inverted MX1000 on the rear and silver powerglides...



and its a LIMITED GL Plus... one of 500 ... read and weep

keep the green Brett... gonna look cloney with white bars... green seat post and green cranks would really set it apart... IN MY FOOKIN OPINON

i bet that cable routing was a joy to do........not
that looked like it could have been a nightmare of a job to do

cool idea though,and it looks clean!